Welcome to Quonset Microwave Part of Quonset Technology, LLCa subsidiary of Applied Radar, Inc.
Celebrating 20 years (Since 1996)!
Quonset Microwave
is a manufacturer and distributor of microwave and RF components for the military, commercial and educational markets.
Our products include RF Synthesizers, Frequency Converters, Mixers,
Filters, Amplifiers Power Detectors, and Power Dividers. Our products are sold internationally for aerospace/defense, wireless communication, satellite communication, automated test equipment (ATE), laboratory prototype, and academic/educational applications.
The QM1003-1-2-2 Dual Channel 1U 19-inch Rack L-band (950-2150 MHz) RF Downconverter provides two channels of RF downconversion with an IF output frequency range of 70 MHz (OPT 201) or 140 MHz (OPT 202).
The QM2010-23-27 USB Stick Synthesizer Module is a low-cost, narrowband 23 GHz to 27 GHz frequency synthesizer ideally suited for bench top test and measurement. Its small size (the size of an average USB Flash Drive) provides a high-quality, low-cost alternative to bench top RF signal generators. The QM2010 series is a truly portable RF Synthesizer solution, finally a synthesizer that you can carry with you in your pocket!
The QM1004-2-18 1U 19-inch Rack 2-18 GHz Combined RF Upconverter and RF Downconverter provides a single channel of RF upconversion and RF downconversion with an RF input frequency range of 2 to 18 GHz in a single unit. The IF is centered at 1 GHz with a 500 MHz bandwidth (750-1250 MHz) with an option to shift the IF to be centered at 300 MHz (50-550 MHz).
The QM1013-101 1U 19-inch Rack 0.001-6 GHz RF Upconverter provides a single channel of RF upconversion with an IF input frequency range of 2 to 3 GHz in a single unit. The RF is output is 0.001-6 GHz with a 160 MHz bandwidth.
The QM1014 1U 19-inch Rack LO Synthesizer Distribution Unit provides LO signals for pairing with QM1013-102 Dual Channel RF Upconverter.
The QM1004-8-12 1U 19-inch Rack 8-12 GHz Combined RF Upconverter and RF Downconverter provides a single channel of RF upconversion and RF downconversion with an RF input frequency range of 8 to 12 GHz in a single unit. The IF is centered at 1 GHz with a 500 MHz bandwidth (750-1250 MHz) with an option to shift the IF to be centered at 300 MHz (50-550 MHz).
The QM1002-2-18-2 Dual Channel 1U 19-inch Rack 2-18 GHz RF Upconverter provides two channels of RF upconversion with an RF output frequency range of 2 to 18 GHz. The IF input is centered at 1 GHz with a 500 MHz bandwidth (750-1250 MHz) with an option to shift the IF input to be centered at 300 MHz (50-550 MHz).
The QM2010-10-20-H USB Stick Synthesizer Module is a low-cost, wideband 10 GHz to 20 GHz frequency synthesizer ideally suited for bench top test and measurement. Its small size and wide output frequency range provide a high-quality, low-cost alternative to bench top RF signal generators. The QM2010 series is a truly portable RF Synthesizer solution, finally a synthesizer that you can carry with you in your pocket!
The QM1004-0.5-18 1U 19-inch Rack 0.5-18 GHz Combined RF Upconverter and RF Downconverter provides a single channel of RF upconversion and RF downconversion with an RF input frequency range of 0.5 to 18 GHz in a single unit. The IF is centered at 1 GHz with a 500 MHz bandwidth (750-1250 MHz) with an option to shift the IF to be centered at 300 MHz (50-550 MHz) or 2.5 GHz (2-3 GHz).
The QM2010-4400 USB Stick Synthesizer Module is a low-cost, wideband 35 MHz to 4.4 GHz frequency synthesizer ideally suited for bench top test and measurement. Its small size (the size of an average USB Flash Drive) and wide output frequency range provide a high-quality, low-cost alternative to bench top RF signal generators. The QM2010 series is a truly portable RF Synthesizer solution, finally a synthesizer that you can carry with you in your pocket!
The QM1003-8-12-2 Dual Channel 1U 19-inch Rack 8-12 GHz RF Downconverter provides two channels of RF downconversion with an RF input frequency range of 8 to 12 GHz. The IF input is centered at 1 GHz with a 500 MHz bandwidth (750-1250 MHz) with an option to shift the IF input to be centered at 300 MHz (50-550 MHz).
The QM2010-5-10 USB Stick Synthesizer Module is a low-cost, wideband 5 GHz to 10 GHz frequency synthesizer ideally suited for bench top test and measurement. Its small size and wide output frequency range provide a high-quality, low-cost alternative to bench top RF signal generators. The QM2010 series is a truly portable RF Synthesizer solution, finally a synthesizer that you can carry with you in your pocket!
The QM2010-6000 USB Stick Synthesizer Module is a low-cost, wideband 25 MHz to 6 GHz frequency synthesizer ideally suited for bench top test and measurement. Its small size and wide output frequency range provide a high-quality, low-cost alternative to bench top RF signal generators. The QM2010 series is a truly portable RF Synthesizer solution, finally a synthesizer that you can carry with you in your pocket!
The QM1007 is an up/downconverter specifically designed as an X-band Frequency Extender for the National Instruments PXIe-5646R and PXIe-5840 Vector Signal Transceivers (VST)
The QM1003-2-18-2 Dual Channel 1U 19-inch Rack 2-18 GHz RF Downconverter provides two channels of RF downconversion with an RF input frequency range of 2 to 18 GHz. The IF input is centered at 1 GHz with a 500 MHz bandwidth (750-1250 MHz) with an option to shift the IF input to be centered at 300 MHz (50-550 MHz).
